TZ-MS型锡膏搅拌机工作原理：

TZ-MS Soldering Fluid Mixing Machine Operation Principle

含有行星真空搅拌机和翻转桶两组机构,搅拌机工作中两支平行的搅拌桨按设定的固定旋转比例运转,沿搅拌桶公转的同时亦快速自转，同时搅拌桶内有随公转同步运转的回旋刮刀不停旋转，使物料由搅拌桶内壁移动到搅拌桨附近。搅拌器的运转方向与公转可同向亦可逆向，达到不同剪切目的。搅拌桨为变频调速，可根据生产工艺自定转速。

翻转桶工作时与搅拌盖密封,工作完成后可与搅拌盖分开,并沿翻转轴心进行倾桶出料(翻转角度范围0-90度)。

The Machine contains two groups of mechanisms: Planet Vacuum Mixer and Rolling-over Bucket, Two Parallel Mixing Paddle is running according to the fixed proportion, revolution around the mixing bucket and also fast Rotation. At the Same Time, the Roundabout Scraper Keeps spinning With the Revolution in Synchronicity in Mixing Barrel, to move The Material from Mixing Barrel Wall to Mixing Paddle Nearby. The Working Direction of Stirrer and The revolution can be Homonymous together to Achieve Different Shear Propose. The Other Two High-speed Disperse Discs ?of the independent Power Device also is running Together With revolution in the Mixing Barrel, Efficient Disperse、Emulsify, Mixing Paddle And High-Speed disperse Discs are running with Variable frequency speed adjusting technology, Which can be Set According To The Production Technology.

Rolling-over Bucket is Hermetic Sealed with Mixing Cover when working and can be separated from Mixing Cover when finished, the bucket can discharge the materials by turning along the axis (The turning angle is 0-90 Degree).

?

TZ-MS型搅拌翻转出料一体机特点：

TZ-MS Mixing and Rolling-over Discharging Machine Characteristic

翻转料桶采用无阀门设计,可从根本上彻底改变桶料“积料”现象，无需搬运料桶，降低劳动强度，出料干净，清洗方便。

Rolling-over? Bucket ?with No?Valve Designing,?can?fundamentally?optimize the phenomenon of "Material Store Up" in bucket,?without?carrying the?bucket,?reducing the labor force,?discharging and cleaning conveniently.